Categories

Pages

Loading... Please wait...

USPSA & IDPA Division Gun Measuring Box by Shockbottle

Includes:

    SKU:
    623-010
    Current Stock:
    4
    $49.95
    Quantity:

    USPSA Gun Check Box

    This box is made for checking pistols for compliance with USPSA Single Stack and Production Division rules.

    "Handgun with empty magazines inserted must fit wholly within a box with internal dimensions of 8 15/16” x 6” x 1 5/8” (tolerance +1/16”, -0”) (USPSA Rules, Feb 2014)

    This box is made very close to the minimum tolerance to be sure a handgun that fits this box will fit in any USPSA box. The gauge is made without a top or bottom so any parts of the pistol that stick out of the gauge can be easily identified.

    Instructions:

    1 - Remove IDPA plate(s) if installed
    2 - Place gauge on a smooth flat surface. Wood, thin cloth or plastic surfaces will help protect handgun finishes.
    3 - Place handgun in the box
    4 - Slide a ruler or other straight edge across the top of the box. If it does not catch on any part of the handgun, it passes the size test.

    Optional IDPA end-plate:

    With the optional IDPA end plate installed, the box becomes 8¾” x 6” x 1-5/8" and can be used for checking compliance for SSP, ESP and CDP:
    "The firearm with the largest magazine inserted must fit in the IDPA gun test box measuring 8 ¾” x 6” x 1 5/8”.

    Instructions:

    1 - Install the IDPA spacer plate on the inside of the box covering the USPSA engraving
    2 - Place gauge on a smooth flat surface. Wood, thin cloth or plastic surfaces will help protect handgun finishes.
    3 - Place handgun in the box
    4 - Slide a ruler or other straight edge across the top of the box. If it does not catch on any part of the handgun, it passes the size test.

    Notes for other IDPA divisions (CCP, BUG, BUG-R)

    CCP pistols may be tested by using a 1/4" thick spacer (not included) under the gun as the CCP test box is 8 ¾” x 6” x 1-3/8”

    BUG-R revolvers may be tested by adding a 1/2" thick spacer (not included) on the long side of the box as the BUG-R box size is 8 ¾” x 5-1/2” x 1 5/8”

    BUG pistols can be tested by adding both the CCP 1/4" thick spacer under the gun and BUG-R 1/2" spacer along a long side of the box, plus another 1-1/2" thick spacer (not included) on the short side of the box to to shorten the length to 7 ¼” x 5 ½” x 1 ⅜”

    Write Review

    1. Good product, could be better

      Posted by Joe on Aug 1st 2016

      Great product well made, however for the price the CCP and revolver spacers should be included.

    Condition: New In stock
    Design by custom Bigcommerce designerCart Designers - Experts in ecommerce webdesign.

    View Cart Go To Checkout