Nice tight fit, solved stopepipe FTE
Fit nice and tight in the holes in the frame, minor fitting, completely solved the stovepipe problem.
Proudly made in the USA from high quality steel to exact tolerances to fit all 1911, STI 2011, and 1911 Hicaps. Requires fitting and pin groove to install (see Dawson Ejector Pin Drills, 098-005 for 1911 frames, 098-006 for 2011 frames). Availible in carbon steel and stainless steel, for 9mm-38 super, 40 S&W-10mm, and 45 ACP. Extended ejectors may need to be shortened to eject live round.
Fit nice and tight in the holes in the frame, minor fitting, completely solved the stovepipe problem.
It takes some fitting and knowledge of how to shape the nose and relief cut for the magazine, but this part worked like a charm. Took my SPS Pantera to the range today to test it out and had zero ejection issues. The 2011 drill bit is too big for a SPS Pantera if anyone else needs to know. Get the 1911 reverse drill bit.
with some minor fitting. works great! having the reverse drill bit made it easier. only took a few minutes to fit. just a little filing on the underside, to keep from hitting magazine.
If you're tuning a problematic gun the extended ejector is a great place to start. Plenty to work with but some guns will run best with it at full length to start the ejection process sooner.
The ejector has enough material to let you really fit it. Work slowly with files to get the right fit and ejection.
A perfect cut, ready to go. I would recommend purchasing the correct left twist drill bit for a flawless installation.
