Easy to install and remove. LOCTITE® is not necessary. Use 7/32" nut driver or socket. If using a torque driver, 18 in-lbs is recommended for both steel and aluminum frames.
These full size bushings will work with grips not less than 0.245" thick. Use Challis Grips' slim bushings for grips 0.188" to 0.245" thick. For still thinner grips use their extra slim bushings.
Challis Grips strongly recommend using their bushing O-rings and grip screw O-rings. They will:
Prevent loose bushings which can lead to stripped frame threads
Eliminate loose grip screws
Prevent scuffed frames
Provide the most secure mounting available for the 1911; you'll feel the difference!
