Sight, for CZ P-07/P-09 Pistols, Fiber Optic Front, by Dawson Precision®

22 Reviews
CZ P-07
CZ P-09
Fiber Optic
Perfect Impact Guarantee

Combination currently unavailable - please choose a different selection.


Is there really a difference with Dawson Precision® sights? You bet there is!

While other sights give off a hazy glow making it difficult to focus, Dawson Precision® sights offer you the sharpest picture. We counterbore the blade so the optic is recessed. This subtle difference focuses the light in the sight making it not only brighter, but clearer. A fully cradled optic provides a longer optic lifespan.

Sight Details:

  • FITS CZ P-07 and P-09 pistols.
  • Counter Bored Optic: Keeps sight picture CLEAR and BRIGHT.
  • Dark Shadow Serrations: BLACKOUT blade and ENHANCE optic.
  • Extra Optic Included - Both Red and Green
  • Easy to Install - Tools, Hardware, and Instructions Included

Things to Remember!



Write A Review
  1. Purfect fit, my 3rd Dawson Precison, CZ sight

    Posted by MattD on Jan 30th 2019

    I have the Dawson fiber, from sight on a P-07, P-07 Cadet .22 LR adapter slide, which I had Dawson install. This one, I did myself which went very well after I beat the double, super strength locktite on what's left of the factory sight so I could install the new sight. That was the worst part!
    The sight picture is excellent as it is for my other Dawson fiber sights.
    Great product and great customer service as well.
    They had recommended a narrower front sight for my old eyes and they are so right!

  2. Exactly what I needed! Great instructions and quick shipping.

    Posted by John Wylie on Jan 28th 2019

    Highly recommend Dawson Precision!

  3. Dependable fo sights

    Posted by Rick on Jan 18th 2019

    This is my 10th dawson sight. The fo tubes make front sight acquisition very fast. Perfect for the range because of pinpoint accuracy afforded by these sights! Also designed for everyday carry, does not snag on any of my rydex holsters. Much faster with front sight acquisition for ccw. If you cannot measure correct front sight height, buy one of their sets and let them guarantee your guns accuracy. Highly reccomend!

  4. CZ PO9/P10 fiber optic front sight compatability

    Posted by Kris Bernstein on Jan 18th 2019

    I like the cantilevered front sight blade of the PO9. It offers a bit longer fiber optic than the stock P10C sight. Slides into the factory dovetail with no problem...just sayin'

  5. Great for p10 tb

    Posted by David Chiappe on Jul 3rd 2018

    I was having elevation issues with my p10 suppressor ready sights. This site took care of the issue and is a lot easier to squire to boot. I’m very happy with this site and the quality is great.

  6. Perfect Site!

    Posted by Craig on Mar 23rd 2018

    Nice folks to talk to, awesome product. Fit was perfect!!

  7. Works on P10C

    Posted by Dan on Feb 25th 2018

    As with anything else from Dawson fit an finish are perfect. I also used with CZC HTAC rear sight. Called and talked with tech support to make sure the sight would work with P10C. They were not sure so I took a chance. Fit is very tight, which is good. I used a little green Loctite instead of the screw. Green is for press fit applications

  8. Addendum

    Posted by Patrick on Nov 19th 2017

    As an addendum to what I wrote previously, I'd note that personally I would NOT use and loctite on the threads of the front set screw. The friction fit on this is quite snug as is. I actually ruined one front sight because despite only using blue loctite on the threads of the set screw the included allen wrench stripped the head of the screw on the attempted uninstall (I do wish Dawson would use a front set screw more inline with the size of the stock as I feel this issued would be remedied). I think a bit of blue loctite on the bottom of the sight and then just tightening the screw until snug (do NOT overtighten) would frankly be enough. Heck even the friction fit might be enough with a bit of blue loctite. If the screw does strip prepare for a hell of a time. I've never had this issue on any other Dawson sights.

  9. Good Replacement Option

    Posted by Patrick on Nov 19th 2017

    I've been using this as a replacement on a CZ-P10c. I pair it with a CZ Custom HTAC rear because Dawson doesn't currently offer a Charger type rear sight for the P07/P10. If you go that route I found a 0.180" tall front seems to work well with POI right behind the front rod.